Reverse Engineering Application
A CAD model was reverse-engineered from a part with no technical data, and the part was then produced. The geometry captured by 3D scanning was dimensionally verified before being prepared for production.
From Problem to Result
The required spare part had no CAD data or technical drawing; the only thing available was a worn physical sample.
The part was digitised with 3D scanning, a production-ready CAD model was reverse-engineered from the resulting point cloud / mesh data, and the geometry was dimensionally compared with the original part.
A verified CAD model and a reliable production source were created for a part that had no technical data.
Technical Details
Services Relevant to This Project
One or more of the following services usually come into play in the production journey of a part like this.
Explore More Examples
Automotive Bracket
A mounting bracket produced from an engineering plastic and required to carry mechanical load. Because only a low quantity was needed, it was produced without the tooling cost of a metal alternative.
Functional Enclosure
An enclosure designed to protect electronic components and produced with flame-retardant properties. The lid-to-body fit and cable entry points were revised at the CAD stage with manufacturability in mind.
Bodywork Component
A connecting part designed and produced for body integration. Because assembly tolerances were verified at the CAD stage, no revision was needed after production.
Have a Similar Project?
Share your requirement and let's evaluate the right production method together.